At present, the gearbox of the common automatic feeding mixer in the market is generally 8-12 gears, and the speed ratio is generally between 14-1. With the development of gearbox technology, the materials of the gearbox are developing towards high strength, high wear resistance and lightweight, which plays an important role in reducing the fuel consumption of the mixer and reducing the loss of transmission kinetic energy.
The operation of the gearbox needs to maintain good lubrication, and attention must be paid to maintenance, otherwise it is likely to cause wear of the gearbox gear, resulting in poor gear shifting of the mixer, weak power and even difficult rotation of the tank.
The transmission oil shall be changed regularly. Generally, it shall be changed once every 100000 km, preferably once a year, and the appropriate gear oil shall be selected according to the working environment.
Don't disassemble the gearbox casually. The gearbox has been carefully adjusted during assembly. It is difficult to ensure such high accuracy after disassembly, which is easy to cause additional wear of the gearbox.
Have good driving habits, such as not taxiing in neutral and not suddenly switching to low gear when driving at high speed.
Although the automatic feeding mixer looks stupid and strong, like other vehicles, its normal operation still depends on the perfect cooperation of each part, so the daily maintenance of each part is very important. Please remember this.
The above content is about the automatic feeding mixer http://www.aqtop.com/ I hope these contents will be helpful to you. If you have any questions or want more information, please consult our official website. We will serve you wholeheartedly.