<listing id="fnxzn"></listing>

          <sub id="fnxzn"><span id="fnxzn"></span></sub>
            <track id="fnxzn"><video id="fnxzn"><span id="fnxzn"></span></video></track>

            <output id="fnxzn"><sub id="fnxzn"></sub></output>

            山東山汽工程機械(集團)有限公司
            熱線電話:400-879-1999 山汽官方微信
            鄭重聲明 購機 售后
            在線詢價
            熱線電話:400-879-1999
            您現在所在的位置: 首頁> 常見問題 >

            你知道自動上料攪拌車損壞后的維修方法嗎?

            所屬分類:常見問題 發布時間:2022-02-25 來源:http://www.aqtop.com 瀏覽量:18

            自動上料攪拌車的出現和使用,能夠為各類工程施工提供了諸多的便利,這些都是自動上料攪拌車的功勞,在使用的程度上提升了該設備的作業效率。使用人員要想保障自動上料攪拌車的使用性能,其中,一個重要的配件就是變速器換擋機,每一種配件使用時間長了,都會出現一些問題,在它損壞后如何進行維修呢?筆者來講解一下。
            The emergence and use of automatic loading mixer can provide a lot of convenience for various engineering construction. These are the credit of automatic loading mixer, which improves the operation efficiency of the equipment to the extent of use. If users want to ensure the service performance of the automatic feeding mixer, one of the important accessories is the transmission shifter. If each accessory is used for a long time, there will be some problems. How to repair it after it is damaged? Let me explain.
            1、自動上料攪拌車離合器損壞的原因動力換擋變速器離合器接合時,液壓油的壓力克服彈簧力壓緊摩擦片。隨著液壓油壓力的升高,摩擦片與金屬盤接觸并逐漸壓緊,使離合器將飛輪動力平穩地傳遞到變速器輸人軸。每次換擋時,摩擦片都要與鋼片發生摩擦,產生的熱量由冷卻液散發出去。
            1. Causes of clutch damage of automatic feeding mixer truck when the clutch of power shift transmission is engaged, the pressure of hydraulic oil overcomes the spring force to press the friction plate tightly. With the increase of hydraulic oil pressure, the friction plate contacts with the metal plate and gradually compresses, so that the clutch smoothly transmits the flywheel power to the transmission input shaft. During each shift, the friction plate will rub with the steel plate, and the heat generated will be dissipated by the coolant.
            當摩擦片及鋼片變薄時,為了使它們充分接合就需要更多的液壓油,發動機須進一步加速,摩擦片在鋼片上的打滑時間也隨之延長,由此產生的摩擦熱量也會更多,促使液壓油的溫度增加,當達到足以改變變速器中密封件性能的溫度時,變速器就會產生內泄。而內泄又從兩個方面繼續引起熱量的增加:高壓油經損壞的密封處泄漏,使油溫繼續升高;
            When the friction plate and steel plate become thinner, more hydraulic oil is required in order to make them fully engaged. The engine must be further accelerated, and the sliding time of the friction plate on the steel plate will be prolonged, resulting in more friction heat, which will increase the temperature of the hydraulic oil. When the temperature is enough to change the performance of the seals in the transmission, the transmission will produce internal leakage. The internal leakage continues to cause the increase of heat from two aspects: the leakage of high-pressure oil through the damaged seal continues to increase the oil temperature;
            由于漏油,液壓泵勢必要輸送更多的油液來保證接合離合器時所需的壓力,使離合器充分地接合,這也要求發動機繼續加速,使液壓泵產生更大的流量。如此惡性循環,必將導致離合器過熱或燒損,直至完全失效。
            Due to oil leakage, it is necessary for the hydraulic pump to deliver more oil to ensure the pressure required to engage the clutch and make the clutch fully engaged, which also requires the engine to continue to accelerate and make the hydraulic pump produce greater flow. Such a vicious cycle will inevitably lead to overheating or burning of the clutch until it is completely ineffective.
            以上就是今天帶給大家的知識,全自動上料攪拌機專注行業多年,為用戶不斷的提供有價值的內容,更多內容請繼續關注我們:http://www.aqtop.com/
            The above is the knowledge brought to you today. The automatic feeding mixer has focused on the industry for many years and continuously provides users with valuable content. Please continue to pay attention to us for more content: http://www.aqtop.com/
            熱門產品 / HOT PRODUCT

             

            首頁 產品 電話 置頂
            中文字幕无码在线观看一区2020

                <listing id="fnxzn"></listing>

                    <sub id="fnxzn"><span id="fnxzn"></span></sub>
                      <track id="fnxzn"><video id="fnxzn"><span id="fnxzn"></span></video></track>

                      <output id="fnxzn"><sub id="fnxzn"></sub></output>